RedArc BCDC1250D WIRING KIT BUNDLE, REAR VEHICLE INSTALL

Paired with the BCDC1250D, the BCDC Wiring Kit has been designed to facilitate easy installation of a REDARC BCDC DC to DC Battery charger when the start battery and auxiliary battery are at opposite ends of the vehicle (more than 8.5m / 28’). Typically, these installations see the auxiliary battery located in the tray of the ute/pickup truck or at the rear of a wagon.

This kit contains all the cables, fuses, fuse holders and connectors required to install the BCDC between the batteries. The cables are even pre-crimped on one end, and through use of the supplied terminal block, the other end of the cables can be trimmed to length to suit the specific installation. The Auxiliary Battery ground cable and solar to Anderson cable are sold separately.

FEATURES

• Complete solution
• Perfect for batteries at the rear of the vehicle
• Cables supplied pre-crimped at one end
• All required cables, fuses, fuse holders and connectors included
• Separate DC and solar charging inputs
• Maximises the performance and life of your auxiliary battery
• Simultaneous DC and solar charging with Green Power Priority
• Suits 12V/24V standard and variable voltage/smart alternators
• Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
• Suitable for use on vehicles with conventional alternator charging systems

PROVEN AND TESTED

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.

WHAT'S INSIDE?

• BCDC CLASSIC UNDER BONNET 50A DC BATTERY CHARGER BCDC1250D
• Brown, Black and Red Cable
• Terminal block with plastic cover
• M5 x 25mm Socket Head Screw
• M5 Nylon Locking Nuts
• M5 Flat Washer 
• 150 mm (6") Red Cable (shorter)
• Fuse Kit
• Cable ties
• Wago® Connector and Boot
• Blue Cable
• 1m (39") Protective Conduit

MOUNTING BRACKETS

In addition to the use of quality fuse kits, REDARC offer a range of vehicle-specific mounting brackets for our BCDC DC-DC Charger range. The 304 stainless steel bracket allows installation into the front of the vehicle for cooler airflow, ensuring optimal performance. They have been designed to fit existing mounting points in the vehicle. Click here to view the range
Not sure what dual battery system is best for your vehicle? Let Shaun Whale explain more.